Solar Street Light - Split-Type, Remote Control

A split-type solar street light, the LED fixture and the solar panel are separate units connected by cable, so the panel can be angled for maximum sun while the light itself is mounted wherever it's needed. Runs entirely on solar, with no electricity cost and no mains wiring.

Split design, independent panel

Because the panel is separate and adjustable, it can be positioned to catch direct sun through the day regardless of where the light itself hangs or mounts, the two don't have to face the same direction.

Zero running cost

Fully solar powered. Once installed there's no electricity bill and no cable run back to a power source, the panel charges the unit and it runs itself.

Two power levels

400W or 600W, so output can match the area; a driveway or courtyard on the lower end, a longer stretch or a wider open area at 600W.

Automatic, remote controlled

A light sensor switches the unit off during the day to focus on charging and on automatically at night. A remote gives manual control, and some configurations add a motion sensor for extra brightness when movement is detected.

Two mounting options

Fits either a vertical pole mount or a wall mount, straight out of the box, choose whichever suits the installation.

Weatherproof

Rated IP66/IP67, dustproof and resistant to heavy rain and storm conditions, built for constant outdoor exposure.

Where it works

Highways, parks, courtyards, farms, driveways and other large outdoor areas needing strong, automatic lighting without mains power.

Specifications

• Power options: 400W or 600W
• Light source: LED, cool white approximately 6500K
• Solar panel: crystalline silicon
• Charging time: approximately 6–7 hours in direct sunlight
• Runtime: up to 15–20 hours on a full charge
• Control: light sensor (dusk-to-dawn) and remote
• Motion sensor: available on some configurations
• Mounting: pole mount or wall mount
• Material: weatherproof ABS or aluminium
• IP rating: IP66/IP67

Before you order

Solar powered. Output and runtime depend on how much direct sun the panel gets, position it with a clear, unobstructed view of the sky.

The LED is integrated. There is no bulb to replace, when the light source reaches end of life, the fixture is replaced.