Up Down Outdoor Wall Light 10W - IP65 Waterproof LED Facade & Porch Light

A wall-mounted LED light that throws a beam both upward and downward, washing the surface above and below the fixture. Used in pairs or a run, it turns a plain facade, boundary wall or entrance into a lit feature rather than just a lit space.

The shade

Opal drum shades top and bottom, tapered outward from a black cylindrical body. The diffused glass softens the beam, so you get a wide, even wash on the wall rather than the hard-edged cone a bare fitting produces, and no glare at eye level when it is mounted beside a door.

Where it works

Villa facades, main gate walls, porches, balconies, garden walls, stairwells and corridors. Rated IP65, so it handles rain, humidity and dust outdoors, while the same fixture suits indoor feature walls and hallways.

Replaceable bulbs

The fixture takes standard GU10 bulbs rather than a sealed integrated LED. When a bulb fails you replace the bulb, not the whole fitting, and you can change colour temperature later without changing the light.

Supplied as 3000K warm white, around 10W total across two bulbs. Fit dimmable GU10 bulbs if your circuit has a dimmer; the bulbs supplied as standard are not dimmable.

Specifications

• Power: 10W total
• Bulb base: GU10, replaceable, 2 per fixture
• Colour temperature: 3000K warm white
• Supply: 220–240V AC mains, no transformer required
• Rating: IP65 weatherproof
• Mounting: wall plate, up-down beam
• Body: black powder-coated aluminium with opal glass shades

Before you order

This is a mains-wired fixture with no plug — it connects to a wall point and should be installed by an electrician if you are not confident wiring to mains.

IP65 covers rain and spray. It is not rated for immersion or for installation directly in a pool surround.